LT IES-2204F 4x10/100TX+2x100SFP
- EAN nr. : 5709728314301
- LM nr. : 7889102423
- Leverandør : LANTECH COMMUNICATIONS
Du skal være logget ind på Lemvigh-Müller for at lægge i kurv.
Beskrivelse
Type nr: 8350-132
Rabatkode: 80080326
UNSPSC (v. 19.0501): 43222612
HS Code: 85176200
Lantech Industri Switch IES-2204F web Smart 4port 10/100TX + 2 100M SFP.
Nem konfigurering via web browser.
Egenskaber:
System Interface/Performance
4x10/100 + 2 100M SFP
2K MAC Address Table
Redundant Power Supply Design for DC 9.5V~60VDC
Wide operating temperature range from -40°C~70°C / -40°F~158°F
CPU Load Display and overload alert event
Pro-Ring2se covers Single Ring
Pro-Ring2se povides a recovery time of less than 10ms for a ring of up to 50 switches
RSTP/STP (IEEE 802.1Ss/w/D) for Ethernet Redundancy
Supports IEEE802.1ab LLDP
DHCP client supported
Port based VLANs
Security
Port Security: Loopback protection to proven loop condition and corrupt ether cable
IP Security: 10 IP address access pemission management to prevent unauthorized intruder
Disable/enable Web MMI via console/Telnet
Multiple notifications of events by emails and traps
Web-based, SNMP V1/V2c/V3 Management
TFTP/HTTP Firmware upgrade
Reset / Factory default button to restore factory setting
IP-30 enclosure with DIN-Rail and wall-mounting design
Nem konfigurering via web browser.
Egenskaber:
System Interface/Performance
4x10/100 + 2 100M SFP
2K MAC Address Table
Redundant Power Supply Design for DC 9.5V~60VDC
Wide operating temperature range from -40°C~70°C / -40°F~158°F
CPU Load Display and overload alert event
Pro-Ring2se covers Single Ring
Pro-Ring2se povides a recovery time of less than 10ms for a ring of up to 50 switches
RSTP/STP (IEEE 802.1Ss/w/D) for Ethernet Redundancy
Supports IEEE802.1ab LLDP
DHCP client supported
Port based VLANs
Security
Port Security: Loopback protection to proven loop condition and corrupt ether cable
IP Security: 10 IP address access pemission management to prevent unauthorized intruder
Disable/enable Web MMI via console/Telnet
Multiple notifications of events by emails and traps
Web-based, SNMP V1/V2c/V3 Management
TFTP/HTTP Firmware upgrade
Reset / Factory default button to restore factory setting
IP-30 enclosure with DIN-Rail and wall-mounting design