Concrete screw Ultracut FBS II 6x55 M8/19
Fischer
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
546397
2763406055
-
Discount code:
UNSPSC Code:
Customs code:
20800265
31161607
73181499
▪ The first concrete screw with diameter 6 with variable embedment
depth off ers a fl exible adaption of the embedment depth to the loads.
▪ The ETA assessment option 1 includes the use in cracked and non-cracked
concrete for highest safety requirements.
▪ The fi rst 6 mm diameter concrete screw with an ETA assessment for the
C1 seismic performance category for additional safety standards.
▪ Diff erent head designs off er a maximum of fl exibility and a perfect
adaptation to the application.
▪ The ULTRACUT FBS II 6 is approved for multiple use of non-load bearing
systems and thereby ideal for the installation of pipe routes, cable trays
and prestressed hollow concrete ceilings.
FUNCTIONING
▪ The ULTRACUT FBS II is recommended for the push-through / pre-positioned installation.
▪ Drill holes do not need to be cleaned during vertical installation (ceiling
and fl oor). For fl oor fi xings the hole must be drilled 3x drill hole diameter deeper.
▪ The approved adjustment for the concrete screws allows the screw to
be unscrewed twice for a total length of 20 mm, to place maximum 10 mm
packing below the base plates or to align the attached part, and then to
tighten the screw again.
▪ We recommend using a tangential impact screwdriver with a suitable
impact screwdriver socket or an internal torx drive.
▪ The screw is installed correctly when the screw head sits fl ush on the fi xture
(visual setting control).
| Pak.str. | 100 |
|---|---|
| Nøglevidde | SW10 |
| Bor diameter (Ø mm) | 6 |
Product datasheet
Download and links
Product datasheet