Safety module UAT Cat.4 48-230V screw
Schneider Electric
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
XPSUAT33A3AP
7586059057
-
Discount code:
UNSPSC Code:
Customs code:
80080470020
39122205
85364900
The Preventa XPS Universal safety modules comes with a number of technical features.
It has protection against unintended changes with the transparent cover at the front face to prevent changes of the functional settings of the selector switches.
XPSU is easy to install, it has side connection for extension unit, no need for external wiring (except XPSUAB and XPSUEP).
Preventa XPSU combines the simplicity of application of hardwired safety modules with a diversity of messages.
With a simple point-to-point connection, Preventa XPS Universal safety modules can send more than 40 different messages!
XPSUAT safety modules are used for monitoring:
Emergency stop circuits conforming to standards ISO 13850 and IEC 60204-1
Switches activated by protection devices conforming to standard ISO 14119:
- Mechanical guard switches
- Magnetic switch with antivalent contacts
- Proximity safety switch with antivalent contacts
- Solenoid safety switch
- PNP Sensor
- 1 PNP + 1 NPN Sensor
- RFID safety switch
Type 4 light curtains conforming to IEC 61496-1 having solid-state safety outputs with test function
4-wire sensing mats or edges conforming to ISO 13856
In addition to the stop category 0 instantaneous opening safety outputs, the
XPSUAT safety modules incorporate stop category 1 time delay outputs which
allow controlled deceleration of the motor to a complete stop (for example, motor braking by variable speed drive).
At the end of the preset delay, the supply is disconnected by opening the time delayed output circuits.
Also the time delay from 0.1 s to 15 min can be selected by selector switches on the front face.
These functions are selected and the start function can be configured by selector switches on the front face.
To monitor a higher number of antivalent contacts using this safety module, the antivalent contacts can be connected with a NC in series and NO in parallel.
None