Timer for Ø22 mm hole with on-delay, 3-60 sec time range 100-230VAC supply
Schneider Electric
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
XB5DTGM3
7517917016
-
Discount code:
UNSPSC Code:
Customs code:
80080467030
39122216
91070000
Harmony timers makes it easy to mount a timer in the front of a panel or in a box.
All it takes is a 22mm hole and the timer is easially fixed with the nut on the back.
The timing setting is adjusted directly on the knob on the front and it is possible to set a minimum limit by removing the front glass and twisting ind.
XB5DTGM3 is a on-delay timer with a supply voltage of 100-230VAC.
The timer has a PNP output with a maximum load up to 0,2A.
The timing range is from 3 to 60 seconds
On the back of the timers are 3 terminals:
A1 is connected to the L1 supply (230V)
A2 is connected to the Load and the neutral is connected on the other side
NC is not in use
The timer has a LED on the front which is blinking when the timer is running and changes to steady light when the output is set.
None