Timer for Ø22 mm hole with on-delay and PNP output, 0,5-10 min time range 24VDC supply
Schneider Electric
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
XB5DTB24
7517916981
-
Discount code:
UNSPSC Code:
Customs code:
80080467030
39122216
91070000
Harmony timers makes it easy to mount a timer in the front of a panel or in a box.
All it takes is a 22mm hole and the timer is easially fixed with the nut on the back.
The timing setting is adjusted directly on the knob on the front and it is possible to set a minimum limit by removing the front glass and twisting ind.
XB5DTB24 is a on-delay timer with a supply voltage of 24VDC.
The timer has a PNP output with a maximum load up to 0,2A.
The timing range is from 0,5 to 10 minutes.
On the back of the timers are 3 terminals:
A1 is connected to the 24V supply
A2 is connected to the 0V supply
18 is the output terminal
The timer has a LED on the front which is blinking when the timer is running and changes to steady light when the output is set.
None