Viega Profipress G Elbow 90° 15, 345532
Viega
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
345532
047501015
-
Discount code:
UNSPSC Code:
Customs code:
10210310657
40141720
74121000
Press connector system with press connectors and pipes made of copper in acc. with EN 1057 and DVGW worksheet GW 392 suitable for:
•Gases in acc. with DVGW G 260 in gas installations in acc. with DVGW-TRGI 2008 (DVGW worksheet G 600) / DVFG-TRF 2012
•Liquid gas in the gas phase for domestic and commercial applications, tested in acc. with DVGW worksheet G 5614
•Heating oil pipelines for heating oil in acc. with DIN 51603-1
•Diesel fuel pipelines for diesel fuel; as suction and pressure pipelines in acc. with EN 590 in consideration of the general technical approval Z-38.4-71
Press connectors
All sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet G 5614, point 4.4.1, connectors with forced leakage.
During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.
Marking
Yellow dot, yellow rectangle and inscription »Gas MOP 5 / GT1«
Sealing elements
HNBR, yellow
Dimensions/Material
Standard sizes: d 12; 15; 18; 22; 28; 35; 42; 54 made of copper
XL sizes: d 64.0 made of copper
Press connectors with threaded connection d 12–54 made of gunmetal
XL press connectors with threaded connection d 64.0 made of copper
Areas of application
Natural gas/Liquid gas
Heating oil/Diesel fuel (d 12–54)
Note
Only Viega copper and gunmetal press connectors, which are marked with a yellow rectangle and have the inscription »Gas MOP 5 / GT1« are permitted for use in installations for gas, heating oil and diesel fuel systems!
Use of the system for application areas and media other than those described here must be agreed with Viega Service Center through a material request.
Operating conditions
Gas and liquid gas systems
•Operating temperature -20 °C up to +70 °C
•Operating pressure max. 0.5 MPa
•Operating pressure at HTR-requirement 650 °C/30 minutes max. 0.1 MPa (1 bar)
Heating oil and diesel fuel installations
•Operating temperature max. 40 °C
•Operating pressure -0.05 up to +0.5 MPa
Certification
Profipress G (d 12–54)
•DVGW-Reg.-No. DG-4550AU0070
Profipress G XL (d 64.0)
•DVGW-Reg.-No. DG-4550AU0070
Use of press tools
The functional safety of the Viega press connector systems is primarily dependent on the perfect condition of the press tools and press machines used. For this reason, for the production of press connections, we recommend the use of Viega press tools and their regular inspection by authorised service points.
Technical data
Press connectors and components are constantly being optimised. If required, the current Z and installation dimensions can be obtained from the download area of the Viega homepage: www.viega.com
None
Miljøvaredeklaration
Download and links
Miljøvaredeklaration