Viega Sanpress XL Elbow 90° 88,9, 353667
Viega
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
353667
035501089
-
Discount code:
UNSPSC Code:
Customs code:
1021031065609
40141720
74122000
Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.
Suitable for drinking water installations in acc. with DIN 1988.
For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.
Press connectors
All sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.
During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.
Marking
Green dot on the press connection
Sealing elements
EPDM, black (ethylene-propylene-dien-monomer rubber); up to 110 °C; not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol
Dimensions/Material
Standard sizes: d 12; 15; 18; 22; 28; 35; 42; 54 made of copper
XL sizes: d 64.0; 66.7; 76.1; 88.9; 108.0 made of copper
XL sizes: d 76.1; 88.9; 108.0 made of gunmetal
Press connectors with threaded connection made of gunmetal: d 12–54; 76.1–108.0
Press connectors with threaded connection made of copper: d 64.0
Areas of application
Drinking water
Heating/Radiator connection
Rainwater
Compressed air, noble gases
Cooling water pipelines
Industry
Plant engineering
Special applications
with EPDM sealing element, factory-fitted
•stationary sprinkler-extinguishing systems - with VdS certificate G 4980009 for the sizes DN20-DN50 in connection with copper pipes in acc. with EN 1057 R290 (hard)
•Solar systems with flat collectors
with FKM sealing element (accessories)
•Solar systems with flat/vacuum collectors
•District heat suppliers and low pressure steam systems
Use of the system for application areas and media other than those described here must be agreed with Viega Service Center.
Operating conditions
Drinking water installations
•Operating temperature max. 85 °C
•Operating pressure max. 1.6 MPa
Heating installations
•Operating temperature max. 110 °C
•Operating pressure max. 1.6 MPa
Note
Observe flow direction!
Components made of copper may not be installed upstream from galvanised ferrous materials!
Note – Limitations of use drinking water
(related to the material - except components as fittings, instruments etc.)
Pipes made of copper may only be used when the pH value of the drinking water is pH ≥ 7.4 or the total volume of organic carbon does not exceed TOCmax = 1.5 mg/l at values between pH = 7.0-7.4!
Note – Limitations of use heating systems
Observe VDI 2035 and EN 12828!
Certification
Profipress (d 12–54)
•DVGW-Reg.-No. DW-8511BQ0586
Profipress XL (d 64.0)
•DVGW-Reg.-No. DW-8511BQ0586
Use of press tools
The functional safety of the Viega press connector systems is primarily dependent on the perfect condition of the press tools and press machines used. For this reason, for the production of press connections, we recommend the use of Viega press tools and their regular inspection by authorised service points.
Technical data
Press connectors and components are constantly being optimised. If required, the current Z and installation dimensions can be obtained from the download area of the Viega homepage: www.viega.com
Accessories for use with Easytop fittings, see product area system fittings.
| weight | 2,533 |
|---|---|
| Dimension | 88,9mm |
| Brand | Viega |
| Product Series | Sanpress XL |
None