Zelio control relay for voltage detection 50mV..5V 2C/O 8A 24-240VAC/DC
Schneider Electric
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
RM22UA31MR
7523007130
-
Discount code:
UNSPSC Code:
Customs code:
80080463030
39122331
85364190
The Zelio RM22 control relay range brings to market 2 new key improvements.
- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments.
- The built-in testbutton simplifies commissioning and troubleshooting by a push of a button.
RM22UA31MR is a control relay for measuring over-/undervoltage.
The measurement is done through the M and E1/E2/E3 terminals which offers 3 measuring ranges:
M and E1 = 0,05-0,5V AC/DC
M and E2 = 0,3-3V AC/DC
M and E3 = 0,5-5V AC/DC
The control relay is supplied by 24 -240V AC/DC which makes it usable in most applications.
The relay has 4 illuminated dials for setting up the function of the relay.
On the top dial you select the function of the relay (overvoltage, undervoltage or both at the same time).
You can also chose if the relay should remember the last measured value in case of a power cut (memory).
On the next dial, the measuring limit can be adjusted between 10 and 100% of the selected range.
The third dial set the hystereses which can be between 5 and 50%.
The bottom dial set the off-delay on the output which can be between 0,1 and 30 seconds.
The LED's on the front shows the status of the contacts.
The testbutton force the output when the timer is powered on.
Bredde (mm) | 22,5 |
---|---|
Højde (mm) | 90 |
Dybde (mm) | 79,5 |
Temperaturområde | -20..60°C |
Testknap | Ja |
Mærke strøm (A) | 8A |
LED | Ja |
Antal poler og kontakter | 2 |
Spolespænding (V) | 24-240V AC/DC |
User instructions
Declaration of conformity
Download and links
User instructions
Declaration of conformity